Specifications in PDF
This card is an easy-to-use, plug-and-play and cost effective solution for two-xis motion control applications. It may be used as a stand-alone unit or may be commanded by an external device.
This series supports up to 4 axes of motion, 16 TTL / CMOS compatible inputs, 16 TTL / CMOS compatible outputs, 3 analog inputs, and up to five optical encoder inputs. The command port is provided for stand-alone operation.
The powerful programming instructions with more than 120 commands include motion control, system configuration, data flow, program flow commands, 32-bit logical and mathematical operations, and other miscellaneous instructions.
These cards can also be operated using an analog joystick or a trackball with quadrature outputs. The speed of the motor is proportional to the tilt angle of the joystick or the rotational speed of the trackball. The joystick has three speed selection keys; fast, medium and slow speed.
Quick and Easy to Install
Very Compact and Easy to Use
Low Power Consumption
Easy Programming Language, No Compiler or Assembler Required
Programmable, Teachable or Manual Control
Different Modes of Operation:
Stand-alone, No PC Required to Operate
Host Controlled, PLC, C/C++, Visual Basic, LabVIEW™
Joystick / Trackball Controlled
Quadrature Encoder Feedback
Built-in Self Test
Easy System Setup and Evaluation
Free Software Included
Quantity adjustment on next page